Aquashut Roof ER
Waterproof & Insulate Your Roof
Aquashut Roof ER is a roof‑top waterproofing and heat‑insulation system that penetrates deeply into concrete and lime surfaces. Available in 5 L, 10 L and 20 L packs, it uses hydro‑repel technology and self‑grouting action to seal pores and hairline cracks up to 12.5 mm deep. The product comes with a 10‑year waterproofing guarantee.
- Hydro Repel Technology & 3D Action: Self‑grouts below the surface to eliminate leaks.
- Provides effective heat insulation without any visible coating or dead load.
- Anti‑fungal and anti‑algae properties; coating does not melt, soften or react with other materials.
- Flexible and resilient; does not require removal of existing screeds or finishes.
- Retains the original roof finish and is highly cost‑effective.
Specifically formulated for all types of roof slabs, including cement and lime concrete surfaces. It penetrates deeply to seal cracks and deliver heat insulation. Typical coverage is 14 sq ft per litre.
Get A Free Quotes
How To Apply
- Surface preparation: Clean thoroughly with wire or coir brush; wet the surface before application.
- Self‑primer coat: Mix product with water in a 2:1 dilution and apply (8–10 m² per litre per coat).
- Main coats (three coats): Apply three undiluted coats using a roller or blade. Maintain ratios 1:1.5, 1:1 and 1:0.5 for first, second and third coats respectively.
- Allow adequate drying time between coats.
Packaging Sizes
5 L, 10 L & 20 L containers
Transform your roof into a leak‑proof, energy‑efficient shield.
Contact us for on‑site inspection or to request a technical data sheet.
